TireSocks 0722TS - Set of 4

TireSocks 0722TS - Set of 4

Fits tire size: 22" x 7" - 17.75" | Fits machines: Genie Z-30/20N, Z-30/20N RJ, Z-34/22N, Z-40/23N, Z-40/23N RJ


TireSocks, Inc. Englewood, CO
Authorized Dealer

Product Description

Fits tire size: 22" x 7" - 17.75"


Diameter: 10"

Height: 4"

Weight: 2.7 lb

Fits machines: Genie Z-30/20N, Z-30/20N RJ, Z-34/22N, Z-40/23N, Z-40/23N RJ, JLG E400A, E400AN, E400AJPN, Skyjack SJ 30 AJE, SJ 30 ARJE, Crown C5 1000-40, C5 1000-50, Caterpillar 2C5000, GC70K, Doosan D15S, D18S-5, D20SC-5, Hyster H30FT, H35FT, S40FT, S50FT, Komatsu FG15HTU-20, FG18HTU-20, Mitsubishi FBC22N2, FBC25N2, FBC25EN2, FG33N, Toyota 7FDU30, 7FGU15, 8FDU30, & Bobcat S70

TireSocks® are used to protect finished flooring from scuff marks caused by rubber tires. TireSocks® are constructed using heavy duty fabrics and can be made to fit any size tire. TireSocks® have several advantages over similar products currently on the market. They are easy to install, don't slip off the tires and self center as you drive. 

Installation Instructions:

To install simply stretch the TireSocks over the top half of each tire, drive the equipment forward slightly and then stretch the remaining half over to complete the installation.


• To remove, pull the top section of the TireSock completely off each tire and drive the machine forward.

• Ensure no part of red center is overlapping tire tread. Do not drive on seam.

• TireSocks are designed for use on interior projects and flat level surfaces.

• TireSocks will last longer if the machine is always in motion while turning and not used on wet, rough, or exterior concrete.

Installation Video:


More Images:

Shop By Brand

Show all Brands

© 2018 - 2021 Gearflow. All rights reserved.