A skid steer trencher is a relatively complex piece of equipment. Depending on whether you buy a hydraulic or manual system, the parts vary dramatically. However, there are a few constant features.
Most trenchers have a spoil auger, which redirects the dirt that the trencher removes. Every trencher also has a chain and a side-shift feature.
What Does a Skid Steer Trencher Do?
A skid steer trencher aims to dig long and narrow trenches for things like water lines.
How Does a Skid Steer Trencher Work?
A trencher has a long arm over which a cupped chain runs. The chain has varying amounts of teeth, depending on its purpose. The teeth loosen soil and rocks so that the cups can remove them from the trench. The cups then deposit the earth in the spoil auger, which places it to the side of the oncoming trencher.
If you choose to take advantage of the feature, you can also use a crumber to empty the trench of any residual dirt.
What Happens If You Have a Faulty Skid Steer Trencher?
If you have a faulty trencher, it may have problems maintaining a regular digging power. In severe cases, the trencher may stall or not break up the ground. Additionally, a faulty attachment puts unnecessary strain on the skid steer.
How Do I Know If I Need to Replace a Skid Steer Trencher?
When the attachment no longer responds or doesn’t operate efficiently, it’s time to consider a replacement. However, sometimes the chain is worn out and can be replaced. When the time comes to replace the trencher itself, the entire attachment will likely work poorly.
How Do I Choose a Skid Steer Trencher?
Choosing a skid steer trencher can be quite challenging. First and foremost, you need to decide which kind of chain to use. There are three main types.
The first type is the rock or frost chain, which breaks up hard and rocky ground. Another variety is the cupped chain, which is for use on soft soils. Finally, you can also choose to use a combo chain that has a combination of sharp teeth and cups.
Choosing the right kind of chain is crucial to the success of your project. Another essential element to consider is the desired width and depth of your trench. Most different brands of trencher offer a variety of different attachment widths and lengths.
It would be best to choose the attachment to give you the correct trench width and depth as they're limited in their adjustability.
Finally, determine whether you want a hydraulic side-shift or a manual one. If your machine is electronic rather than hydraulic, a hydraulic shift won’t help you.
Furthermore, if you have a hydraulic skid steer, you need to match the hydraulic attachment to the machine’s hydraulic system.
However, if you choose to go with a manual side-steer, you have no need for hydraulic systems.